Product Overview
- Wireless Standard
- IEEE802.3,IEEE802.3uIEEE802.3x
- Power Supply
- Input: AC110-260V Output: 52V 2.88A
- Dimensions
- 220*161*37mm
OEM/ODM customization supported · Sample orders accepted
Detailed Specifications
Specifications are transcribed from the factory datasheet of this model.
| Parameter | Value |
|---|---|
| Wireless Standard | IEEE802.3,IEEE802.3uIEEE802.3x |
| Port Definition | 8* 10/100M RJ45 ports+POE 2*10/100M RJ45 ports |
| Power Supply | Input: AC110-260V Output: 52V 2.88A |
| Dimensions | 220*161*37mm |
| Backplane Bandwidth | 2Gbps |
| Forwarding Rate | 0.1488Mbps/port |
| Operating Environment | Working Temperature: 0 °C~40 °C; Storage Temperature: -40 °C~80 °C Working Humidity: 10%~90%RH Non-condensing; Storage Humidity: 5%~90%RH Non-condensing |
Full datasheet available on request
Series positioning
Middle of the series — the usual balance point for standard guest-room and office coverage.
CF-SF181P · 5/16 · — · —
Compare within the series
Values below are taken from the manufacturer datasheet. A blank cell means the manufacturer does not publish that parameter for the model.
| Model | Wireless speed | Band | Standard | IP rating | Power |
|---|---|---|---|---|---|
| CF-AC101 | — | — | — | — | — |
| CF-RF105 | — | — | — | — | — |
| CF-RG215 | — | — | — | — | — |
| CF-SF1162P | — | — | IEEE802.3/u/x | — | Input: AC110-260V Output: 52V 2.88A / 52V 5.76A (optional) |
| CF-SF181P (this model) | — | — | IEEE802.3,IEEE802.3uIEEE802.3x | — | Input: AC110-260V Output: 52V 2.88A |
Deployment reading for this category
Recommended solution
Hotel & Guesthouse WiFi Coverage
One in-wall AP per guest room plus ceiling APs for corridors, lobbies and restaurants, centrally managed by an AC gateway and PoE switch with AP status visible at the front desk.
/solutions/hotel/Technical note
PoE Injector vs PoE Switch — Which to Use
For a single AP an injector is cheapest; for many points a switch wins. Decide on point count, central management and whether you need multiple VLANs.
/knowledge/poe-injector-vs-switch/Technical note
PoE Standards Explained — 802.3af vs at vs bt
Getting PoE wrong breaks deployments: under-powered devices reboot in a loop and are usually misdiagnosed as coverage problems. Here are the power classes and how to budget.
/knowledge/poe-standards/Related Products
View Similar Products
CF-AC101
Switch / Gateway / AC Controller CF-AC101, dimensions 280*180*44mm, for centralized AP management and PoE network deployment.
CF-RF105
Switch / Gateway / AC Controller CF-RF105, dimensions 230*25*50mm, for centralized AP management and PoE network deployment.
CF-RG215
Switch / Gateway / AC Controller CF-RG215, dimensions 230*25*50mm, for centralized AP management and PoE network deployment.
CF-SF1162P
Switch / Gateway / AC Controller CF-SF1162P, supports IEEE802.3/u/x, dimensions 320*210*45mm, Input: AC110-260V Output: 52V 2.88A / 52V 5.76A (optional), for centralized AP management and PoE network deployment.