Product Overview
- Wireless Speed
- 3000Mbps
- Frequency Band
- 2.4/5.8GHz
- Wireless Standard
- IEEE802.11 a/b/g/n/ax
- Antenna
- Build in antenna
- Power Supply
- DC5V,2A Adapter
- Dimensions
- 104*104*192mm
OEM/ODM customization supported · Sample orders accepted
Detailed Specifications
Specifications are transcribed from the factory datasheet of this model.
| Parameter | Value |
|---|---|
| Wireless Speed | 3000Mbps |
| Frequency Band | 2.4/5.8GHz |
| Wireless Standard | IEEE802.11 a/b/g/n/ax |
| Antenna | Build in antenna |
| Ethernet Ports | 1*10/100/1000Mbps RJ45 WAN Port 2*10/100/1000Mbps RJ45 LAN Port 1*Mesh;1*WPS/Reset;1*DC Power |
| Power Supply | DC5V,2A Adapter |
| DDR / Flash | 256/128MB |
| MTBF | >250000H |
| Dimensions | 104*104*192mm |
Full datasheet available on request
Series positioning
Middle of the series — the usual balance point for standard guest-room and office coverage.
CF-WR655AX · 14/29 · 3000Mbps · 2.4/5.8GHz
Compare within the series
Values below are taken from the manufacturer datasheet. A blank cell means the manufacturer does not publish that parameter for the model.
| Model | Wireless speed | Band | Standard | IP rating | Power |
|---|---|---|---|---|---|
| CF-AX3000 | 3000Mbps | 2.4/5.8GHz | IEEE802.11 a/b/g/n/ac/ax | — | DC12V,1.5A Adapter |
| CF-WR630AX | 3000Mbps | 2.4/5.8GHz | IEEE802.11 a/b/g/n/ac/ax | — | DC12V,1A Adapter |
| CF-WR631AX V2 | 3000Mbps | 2.4/5.8GHz | IEEE802.11 a/b/g/n/ac/ax | — | DC12V,1A Adapter |
| CF-WR631AX V3 | 3000Mbps | 2.4/5.8GHz | IEEE802.11 a/b/g/n/ac/ax | — | DC12V,1A Adapter |
| CF-WR655AX (this model) | 3000Mbps | 2.4/5.8GHz | IEEE802.11 a/b/g/n/ax | — | DC5V,2A Adapter |
Deployment reading for this category
Recommended solution
Home & Apartment Full Coverage
For large homes, duplexes and rental apartments: panel APs and repeaters extend dead zones, Mesh routers keep roaming stable without re-cabling.
/solutions/home-apartment/Technical note
Default IP Address of Access Points — How to Find It
Management addresses differ by vendor and by batch. The reliable approach is not memorising a table but knowing three methods: read the label, read the gateway, or factory reset.
/knowledge/default-ip-address/Technical note
Channel Planning and Interference Control
The goal of channel planning is not the strongest signal but adequate physical separation between co-channel APs. Without density, more power only creates more interference.
/knowledge/channel-planning/