Product Overview
- Power Supply
- 48V PoE
OEM/ODM customization supported · Sample orders accepted
Detailed Specifications
Specifications are transcribed from the factory datasheet of this model.
| Parameter | Value |
|---|---|
| Power Supply | 48V PoE |
Full datasheet available on request
Series positioning
Middle of the series — the usual balance point for standard guest-room and office coverage.
MQ-1201G · 7/9 · — · —
Compare within the series
Values below are taken from the manufacturer datasheet. A blank cell means the manufacturer does not publish that parameter for the model.
Deployment reading for this category
Recommended solution
Hotel & Guesthouse WiFi Coverage
One in-wall AP per guest room plus ceiling APs for corridors, lobbies and restaurants, centrally managed by an AC gateway and PoE switch with AP status visible at the front desk.
/solutions/hotel/Technical note
PoE Standards Explained — 802.3af vs at vs bt
Getting PoE wrong breaks deployments: under-powered devices reboot in a loop and are usually misdiagnosed as coverage problems. Here are the power classes and how to budget.
/knowledge/poe-standards/Technical note
Channel Planning and Interference Control
The goal of channel planning is not the strongest signal but adequate physical separation between co-channel APs. Without density, more power only creates more interference.
/knowledge/channel-planning/