Product Overview
- Wireless Speed
- 1500Mbps
- Frequency Band
- 2.4G/5.8G
- Wireless Standard
- IEEE 802.11b/g/n/ac/ax
OEM/ODM customization supported · Sample orders accepted
Product Images
Click an image to view the original size
Detailed Specifications
Specifications are transcribed from the factory datasheet of this model.
| Parameter | Value |
|---|---|
| Wireless Speed | 1500Mbps |
| Frequency Band | 2.4G/5.8G |
| Wireless Standard | IEEE 802.11b/g/n/ac/ax |
Full datasheet available on request
Product Description
MQ1512G 1500M WIFI6 panel AP Product introduction: MQ1800G is a 2.4G/5.8G 11AC/AX dual-band WIFI6 wireless indoor AP, supporting 1500Mbps (300Mbps+1201Mbps), dual-band concurrent, supporting 5.8G/2.4G Simultaneous data exchange, built-in dual-band antenna, simple appearance while ensuring good wireless signal coverage.
PoE power supply function that complies with 802.3af standard makes network interconnection more flexible. MQ1502G is the best product for wireless coverage in hotels, corporate office buildings (offices), villas, restaurants, and homes to build wireless networks.
Product features: MQ system, plug and play.
Series positioning
Middle of the series — the usual balance point for standard guest-room and office coverage.
MQ-1502G · 4/9 · 1500Mbps · 2.4G/5.8G
Compare within the series
Values below are taken from the manufacturer datasheet. A blank cell means the manufacturer does not publish that parameter for the model.
| Model | Wireless speed | Band | Standard | IP rating | Power |
|---|---|---|---|---|---|
| MQ-3002G | 3000Mbps | 2.4G/5.8G | IEEE 802.11b/g/n/ac/ax | — | — |
| WA-580 | 1800Mbps | 2.4G and 5.8GHz | IEEE802.11ax (Wi-Fi 6) | — | 48V PoE |
| MQ-1502G (this model) | 1500Mbps | 2.4G/5.8G | IEEE 802.11b/g/n/ac/ax | — | — |
| MQ-1512G | 1500Mbps | 2.4G/5.8G | IEEE 802.11b/g/n/ac/ax | — | — |
| MQ-1200G | 1167Mbps | 2.4G/5.8G | IEEE 802.11b/g/n | — | — |
Deployment reading for this category
Recommended solution
Hotel & Guesthouse WiFi Coverage
One in-wall AP per guest room plus ceiling APs for corridors, lobbies and restaurants, centrally managed by an AC gateway and PoE switch with AP status visible at the front desk.
/solutions/hotel/Technical note
PoE Standards Explained — 802.3af vs at vs bt
Getting PoE wrong breaks deployments: under-powered devices reboot in a loop and are usually misdiagnosed as coverage problems. Here are the power classes and how to budget.
/knowledge/poe-standards/Technical note
Channel Planning and Interference Control
The goal of channel planning is not the strongest signal but adequate physical separation between co-channel APs. Without density, more power only creates more interference.
/knowledge/channel-planning/Related Products
View Similar Products
MQ-1200G
In-wall Wireless AP MQ-1200G with 1167Mbps wireless rate and 2.4G/5.8G dual-band, supports IEEE 802.11b/g/n, for hotel guest rooms, apartments and dormitories.
MQ-1201G
In-wall Wireless AP MQ-1201G, 48V PoE, for hotel guest rooms, apartments and dormitories.
MQ-1512G
In-wall Wireless AP MQ-1512G with 1500Mbps wireless rate and 2.4G/5.8G dual-band, supports IEEE 802.11b/g/n/ac/ax, for hotel guest rooms, apartments and dormitories.
MQ-3002G
In-wall Wireless AP MQ-3002G with 3000Mbps wireless rate and 2.4G/5.8G dual-band, supports IEEE 802.11b/g/n/ac/ax, for hotel guest rooms, apartments and dormitories.