Product Overview
- Wireless Speed
- 3000Mbps
- Frequency Band
- 2.4G and 5.8GHz
- Wireless Standard
- IEEE802.11ax (Wi-Fi 6)
- Antenna
- Built-in 2 x 2.4G + 2 x 5G antennas
- Power Supply
- 48V PoE
- Dimensions
- 86*86*40mm
OEM/ODM customization supported · Sample orders accepted
Product Images
Click an image to view the original size
Detailed Specifications
Specifications are transcribed from the factory datasheet of this model.
| Parameter | Value |
|---|---|
| Wireless Speed | 3000Mbps |
| Frequency Band | 2.4G and 5.8GHz |
| Wireless Standard | IEEE802.11ax (Wi-Fi 6) |
| Antenna | Built-in 2 x 2.4G + 2 x 5G antennas |
| Power Supply | 48V PoE |
| Dimensions | 86*86*40mm |
Full datasheet available on request
Product Description
WA-590 Product Overview Connected to PoE powered equipment WiFi6 dual-band in-wall wireless AP M-WA590 is a high-performance, high-speed indoor in-wall wireless AP that can provide 2.4G and 5.8GHz dual-band wireless high-speed services.
2.4G can provide up to 574Mbps access rate, 5G can provide up to 3000Mbps POE-powered back box in-wall type can provide 2402Mbps access rate. White Gray Gold WIRELESS In-wall installation Weight <0.35Kg Standard 48V PoE power supply Built-in 2 2.4G antennas, 2 5G antennas Suitable for various indoor scenarios, such as hotels, guesthouses, cafes, offices, schools, shopping malls, etc.
AP size: 86mm×86mm×40mm Meiweisi Technology Co., Ltd.
Series positioning
Middle of the series — the usual balance point for standard guest-room and office coverage.
WA-590 · 2/9 · 3000Mbps · 2.4G and 5.8GHz
Compare within the series
Values below are taken from the manufacturer datasheet. A blank cell means the manufacturer does not publish that parameter for the model.
| Model | Wireless speed | Band | Standard | IP rating | Power |
|---|---|---|---|---|---|
| MQ-3002G | 3000Mbps | 2.4G/5.8G | IEEE 802.11b/g/n/ac/ax | — | — |
| WA-590 (this model) | 3000Mbps | 2.4G and 5.8GHz | IEEE802.11ax (Wi-Fi 6) | — | 48V PoE |
| WA-580 | 1800Mbps | 2.4G and 5.8GHz | IEEE802.11ax (Wi-Fi 6) | — | 48V PoE |
| MQ-1502G | 1500Mbps | 2.4G/5.8G | IEEE 802.11b/g/n/ac/ax | — | — |
| MQ-1512G | 1500Mbps | 2.4G/5.8G | IEEE 802.11b/g/n/ac/ax | — | — |
Deployment reading for this category
Recommended solution
Hospital & Medical Campus WiFi Coverage
A dense ceiling AP grid in high-traffic outpatient areas, one in-wall AP per ward, and a dedicated PDA SSID with 802.11k/v/r for transparent roaming — with the AC pushing per-zone policy and integrating with hospital authentication.
/solutions/hospital/Technical note
PoE Standards Explained — 802.3af vs at vs bt
Getting PoE wrong breaks deployments: under-powered devices reboot in a loop and are usually misdiagnosed as coverage problems. Here are the power classes and how to budget.
/knowledge/poe-standards/Technical note
Channel Planning and Interference Control
The goal of channel planning is not the strongest signal but adequate physical separation between co-channel APs. Without density, more power only creates more interference.
/knowledge/channel-planning/Related Products
View Similar Products
MQ-1200G
In-wall Wireless AP MQ-1200G with 1167Mbps wireless rate and 2.4G/5.8G dual-band, supports IEEE 802.11b/g/n, for hotel guest rooms, apartments and dormitories.
MQ-1201G
In-wall Wireless AP MQ-1201G, 48V PoE, for hotel guest rooms, apartments and dormitories.
MQ-1502G
In-wall Wireless AP MQ-1502G with 1500Mbps wireless rate and 2.4G/5.8G dual-band, supports IEEE 802.11b/g/n/ac/ax, for hotel guest rooms, apartments and dormitories.
MQ-1512G
In-wall Wireless AP MQ-1512G with 1500Mbps wireless rate and 2.4G/5.8G dual-band, supports IEEE 802.11b/g/n/ac/ax, for hotel guest rooms, apartments and dormitories.