Product Overview
- Wireless Speed
- 300Mbps
- Power Supply
- 24V PoE
- IP Rating
- IP65
OEM/ODM customization supported · Sample orders accepted
Product Images
Click an image to view the original size
Detailed Specifications
Specifications are transcribed from the factory datasheet of this model.
| Parameter | Value |
|---|---|
| Wireless Speed | 300Mbps |
| Power Supply | 24V PoE |
| IP Rating | IP65 |
Full datasheet available on request
Product Description
BS500T Product Overview MWS-B500T is a 5.8G high-power long-distance wireless bridge. Adopts 5.8G working frequency band, strong anti-interference ability, American Qualcomm engineering grade chip, supports point-to-point and point-to-multipoint bridging, 5.8GHz frequency band, wireless transmission rate up to 300Mbps; Using high-power circuit design and built-in high-gain directional antenna, the transmission distance is longer.
3KM transmission distance, one-key pairing, automatic connection, interface description: Digital display LAN port LAN port DC power interface toggle switch (A/B) BRIDGE digital switch key/Reset key Can be wall-mounted or fixedly installed on a pole Support 24V PoE power supply Adopt outdoor rainproof design, IP65 protection level, rainproof, dustproof, windproof, sunproof 3KM Suitable for various outdoor scenarios, such as: outdoor construction site monitoring, power monitoring, scenic area monitoring, factory area monitoring, dock monitoring, community monitoring
Series positioning
Middle of the series — the usual balance point for standard guest-room and office coverage.
BS-500T · 11/22 · 300Mbps · —
Compare within the series
Values below are taken from the manufacturer datasheet. A blank cell means the manufacturer does not publish that parameter for the model.
| Model | Wireless speed | Band | Standard | IP rating | Power |
|---|---|---|---|---|---|
| BS-300D | 300Mbps | 2.4G | — | IP65 | 24V PoE |
| BS-500L | 300Mbps | — | — | IP65 | 24V PoE |
| BS-500T (this model) | 300Mbps | — | — | IP65 | 24V PoE |
| CF-E11 | 2.4GHz: 300Mbps | — | — | — | — |
| CF-E112N V2 | 300Mbps | 2.4GHz | IEEE802.11b/g/n | 2KV Thundering proof IP65 | — |
Deployment reading for this category
Recommended solution
Campus & Dormitory WiFi Coverage
Ceiling APs per teaching floor, in-wall APs per dormitory room, and outdoor APs with bridges linking classrooms, dormitories and sports fields into one network.
/solutions/campus/Technical note
Antenna Types — Omni, Directional and Sector
The antenna decides where the energy goes. Omni for point-centred coverage, directional for links and distance, sector for corridors and large flat areas.
/knowledge/antenna-types/Technical note
Default IP Address of Access Points — How to Find It
Management addresses differ by vendor and by batch. The reliable approach is not memorising a table but knowing three methods: read the label, read the gateway, or factory reset.
/knowledge/default-ip-address/Related Products
View Similar Products
BS-300D
Wireless Bridge / CPE BS-300D with 300Mbps wireless rate and 2.4G single-band, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-500L
Wireless Bridge / CPE BS-500L with 300Mbps wireless rate, dimensions 395*340*250mm, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-560L
Wireless Bridge / CPE BS-560L with 900Mbps wireless rate, dimensions 395*340*250mm, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-900
Wireless Bridge / CPE BS-900 with 900Mbps wireless rate, dimensions 250*90*60mm, 24V PoE / 12V DC, for point-to-point links between buildings, cranes and elevators.