Product Overview
- Wireless Speed
- 900Mbps
- Power Supply
- 24V PoE
- IP Rating
- IP65
- Dimensions
- 395*340*250mm
OEM/ODM customization supported · Sample orders accepted
Product Images
Click an image to view the original size
Detailed Specifications
Specifications are transcribed from the factory datasheet of this model.
| Parameter | Value |
|---|---|
| Wireless Speed | 900Mbps |
| Power Supply | 24V PoE |
| IP Rating | IP65 |
| Dimensions | 395*340*250mm |
| Transmission Mode | 0–20km LOS (5.8GHz) |
Full datasheet available on request
Product Description
BS560L Product Overview MWS-B560L is a 5.8G high-power long-distance sector wireless 20km long-distance transmission 900Mbps wire bridge. It adopts MTK enterprise-level chip, supports point-to-point and point-to-multipoint bridging, 5.8GHz frequency band, and wireless transmission rate up to 900 Mbps; Using high-power PA circuit design, 0-20 kilometers barrier-free and stable point-to-point bridge 5.8GHz POE power supply and fixed transmission.
Interface description: WIRELESS can be wall-mounted or fixedly installed on a pole. Supports 24V PoE power supply. Adopts outdoor rain-proof design, IP65 protection level, rainproof, dustproof, windproof, and sunproof.
Suitable for various outdoor scenarios, such as: outdoor construction site monitoring, power monitoring, scenic area monitoring, factory monitoring, dock monitoring, community monitoring outdoor network transmission and other application scenarios.
Size: 395mm*340mm*250m Windproof, Waterproof, Sunproof BRIDGE Meiweisi Technology Co., Ltd.
Series positioning
Middle of the series — the usual balance point for standard guest-room and office coverage.
BS-560L · 2/22 · 900Mbps · —
Compare within the series
Values below are taken from the manufacturer datasheet. A blank cell means the manufacturer does not publish that parameter for the model.
Deployment reading for this category
Recommended solution
Campus & Dormitory WiFi Coverage
Ceiling APs per teaching floor, in-wall APs per dormitory room, and outdoor APs with bridges linking classrooms, dormitories and sports fields into one network.
/solutions/campus/Technical note
Antenna Types — Omni, Directional and Sector
The antenna decides where the energy goes. Omni for point-centred coverage, directional for links and distance, sector for corridors and large flat areas.
/knowledge/antenna-types/Technical note
Default IP Address of Access Points — How to Find It
Management addresses differ by vendor and by batch. The reliable approach is not memorising a table but knowing three methods: read the label, read the gateway, or factory reset.
/knowledge/default-ip-address/Related Products
View Similar Products
BS-300D
Wireless Bridge / CPE BS-300D with 300Mbps wireless rate and 2.4G single-band, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-500L
Wireless Bridge / CPE BS-500L with 300Mbps wireless rate, dimensions 395*340*250mm, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-500T
Wireless Bridge / CPE BS-500T with 300Mbps wireless rate, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-900
Wireless Bridge / CPE BS-900 with 900Mbps wireless rate, dimensions 250*90*60mm, 24V PoE / 12V DC, for point-to-point links between buildings, cranes and elevators.