Product Overview
- Wireless Speed
- 900Mbps
- Power Supply
- 24V PoE / 12V DC
- IP Rating
- IP65
- Dimensions
- 250*90*60mm
OEM/ODM customization supported · Sample orders accepted
Product Images
Click an image to view the original size
Detailed Specifications
Specifications are transcribed from the factory datasheet of this model.
| Parameter | Value |
|---|---|
| Wireless Speed | 900Mbps |
| Power Supply | 24V PoE / 12V DC |
| IP Rating | IP65 |
| Dimensions | 250*90*60mm |
| Transmission Mode | 0–4km LOS (5.8GHz) |
Full datasheet available on request
Product Description
BS900 Product Overview No setup required Easy installation 0-4KM transmission BS900 uses MediaTek engineering-grade chips, with stable and reliable performance. 5.8GHz working frequency band, up to 900Mbps wireless transmission rate, strong anti-interference ability and stable transmission; Using high-power circuit design, built-in point-to-point transmission POE/DC power supply 5.8G high-power high-gain directional antenna, the transmission distance is longer.
Interface description: Digital display LAN port LAN port DC power interface Toggle switch (A/B) Digital switch key/Reset key WIRELESS Can be wall-mounted or fixedly installed on a pole Supports 24V PoE power supply and 12V DC power supply Adopts outdoor rainproof design, IP65 protection level, rainproof, dustproof, windproof, and sunproof Suitable for various outdoor scenarios, such as: elevator monitoring, outdoor construction site monitoring, tower crane monitoring, Scenic area monitoring, factory monitoring, dock monitoring, community monitoring and other application scenarios
Series positioning
Middle of the series — the usual balance point for standard guest-room and office coverage.
BS-900 · 3/22 · 900Mbps · —
Compare within the series
Values below are taken from the manufacturer datasheet. A blank cell means the manufacturer does not publish that parameter for the model.
Deployment reading for this category
Recommended solution
Elevator CCTV Wireless Backhaul
One 5.8GHz bridge on the car top and one in the shaft replace a travelling cable with no spare cores — paired by LED display with no configuration, clear of inverter noise, with a relay option for tall shafts.
/solutions/elevator/Technical note
Antenna Types — Omni, Directional and Sector
The antenna decides where the energy goes. Omni for point-centred coverage, directional for links and distance, sector for corridors and large flat areas.
/knowledge/antenna-types/Technical note
Default IP Address of Access Points — How to Find It
Management addresses differ by vendor and by batch. The reliable approach is not memorising a table but knowing three methods: read the label, read the gateway, or factory reset.
/knowledge/default-ip-address/Related Products
View Similar Products
BS-300D
Wireless Bridge / CPE BS-300D with 300Mbps wireless rate and 2.4G single-band, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-500L
Wireless Bridge / CPE BS-500L with 300Mbps wireless rate, dimensions 395*340*250mm, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-500T
Wireless Bridge / CPE BS-500T with 300Mbps wireless rate, 24V PoE, for point-to-point links between buildings, cranes and elevators.
BS-560L
Wireless Bridge / CPE BS-560L with 900Mbps wireless rate, dimensions 395*340*250mm, 24V PoE, for point-to-point links between buildings, cranes and elevators.